Accessories Archive

Low Frequency Transmitter Clamp 5″/125mm (SiS/SD)

September 23, 2024September 23, 2024

The Vivax-Metrotech Low Frequency Transmitter Clamp is a precise way to apply the locating signal if a direct connection is not possible. Signal Select (SiS) and Signal Direction (SD) are special frequencies placed on the target utility line to support positive line identification in challenging environments. Used in conjunction with the vLoc3-5000 or...

vCamDrain Carry Bag

May 7, 2023

The vCamDrain Wireless Reel Carry Bag has room to comfortably carry the reel along with the commonly used tools and accessories. A padded zippered compartment has ample room for an 11-inch tablet or tablet stand. The bag has two heavy-duty zippers for fast and easy access to the reel, built-in carry handles and...

Tablet Mount Adapter

April 27, 2023May 7, 2023

The vCamDrain tablet mount is installed on the open end of the reel where the pushrod is deployed. The Tablet Mount Adapter adds the ability to mount common off-the-shelf tablet holders, phone holders, swivels, or tripods.

D34 and D46 Series Camera Test Leads

August 23, 2021August 24, 2021

The vCam D34/D46 Camera Test Lead is a troubleshooting tool to check the D34 and D46 series camera heads by bypassing the reel and going straight into the control module. This test lead can be used with the vCam-5 or vCam-6 control module with the D34 and D46 camera heads.

New Loc3 Series Backpack

March 30, 2021April 20, 2021

Pack all your locating needs in the Vivax-Metrotech Loc3 Series Backpack. Made from durable 1680D Ballistic Nylon fabric, its solid construct embeds functional features, such as rugged oversize zippers, easy-to-reach pockets, molded rubber top handle and loops to hold a vLoc3 receiver. Carry locating equipment in comfort with the backpack's wide padded ventilated...

Direct Connection Lead with Standard Clips, Loc3-25Tx

January 20, 2021

The direct connection lead for the 25-Watt transmitter consists of two cables, one (red clip) must be connected to the conductor being located, the other (black clip) to a suitable ground (a ground stake is provided with the transmitter). The Standard Clip version is more suited for day to day use where the size...

Interconnect Cables

January 11, 2021January 15, 2021

The interconnect cable connects the vCam-5 or vCam-6 Control Modules to the Type-CP and Type-MX cable reels. Standard Length = 12-feet / 3.6m Extended Length = 26-feet / 7.9m Each interconnect cable is supplied with a Velcro strap to help cable control and a rubber dust cap to protect the control...

Direct Connection Lead with Standard Clips

November 10, 2020January 20, 2021

The direct connection lead consists of two cables, one (red clip) must be connected to the conductor being located, the other (black clip) to a suitable ground (a ground stake is provided with the transmitter). A few options are available for specific industries and conditions. Standard Clips The Standard Clip version is more suited...

Loc3 Series Transmitters Carry Bag

September 15, 2020September 16, 2020

The Loc3-Tx carry bag has compartments for the ground stake, connection leads and more. The transmitter can be fully operated without removing removing it from the bag. The bag comes with an adjustable shoulder strap.

Type-MX reel

August 27, 2018November 23, 2023

The Type-MX Mini-Reel is a compact lightweight reel for use with the vCam-6 or vCam-5 control modules. The Type-MX Mini Reel is constructed of a stainless-steel tubular frame with a carbon fiber pushrod drum. The Type-MX Mini reels size allows it to be used in a more confined area and for special applications...

Type “B” Skid with Light Kit

July 22, 2018August 26, 2018

Type-B Skid with Light Kit The Type "B" Skid is used to keep the camera head centered in pipes and off the floor avoiding debris and obstructions. The Type-B Skid has adjustable settings for use in pipe diameters from 8” to 15”. When the skid is completely collapsed it can be used in...

Rotate and Tilt Table

July 13, 2018July 20, 2018

The Rotate and Tilt Table (RATT) - mounts between the Type-CP reel and the vCam-5 or vCam-6 control module. The RATT Table adds the flexibility to position the control module to a comfortable viewing angle. Easy installation Stainless-steel construction Locks the control module to the reel