Loc3 Series 5-Watt Broadband Transmitter

The 5-Watt broadband transmitter has selectable induction and direct connection frequencies from 98Hz to 200kHz, SD mode (Signal Direction), fault find and true resistance measurement up to 1 Mohm. The two inch by one-inch dot matrix display with LED backlight shows output current, connection type, volts, resistance, frequency, volume, battery condition and high...
View More

Loc3 Series 10-Watt Broadband Transmitter

The 10-Watt broadband transmitter has selectable induction and direct connection frequencies from 98Hz to 200kHz, SD mode (Signal Direction), fault find and true resistance measurement up to 1 Mohm. The two inch by one-inch dot matrix display with LED backlight shows output current, connection type, volts, resistance, frequency, volume, battery condition and high...
View More

Loc-5STx 5-Watt Transmitter

The Loc-5STx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The two inch by one-inch back-lit dot matrix display shows output current, connection type, volts, resistance, frequency, volume,...
View More

Loc-5DTx 5-Watt Dual Output Transmitter

The Loc-5DTx transmitter has the capability to send up to four frequencies (between 8kHz and 83kHz) simultaneously, each of them allocated to a different output (channel). The Loc-5DTx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance...
View More

Loc-10Tx 10-Watt Series Transmitters

Loc-10Tx 10-Watt Transmitter The Loc-10Tx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The two inch by one-inch backlit dot matrix display shows output current, connection type, volts,...
View More

VM-560FF 1-Watt Transmitter

The VM-560FF Transmitters will meet the requirements of those wishing to trace utilities such as service line drops over a short distance. The 1-Watt Transmitter applies a locate frequency by direct connection or induction. Optional Induction Clamps can be used to clamp around a line and induce the locate signal onto it.    VM-560FF = Induction: 480kHz, Direct Connection: 512Hz, 8.19kHz, 480kHz, and Fault-find ...
View More

Loc-1Tx 1-Watt Transmitter

The Loc-1Tx Transmitter has one induction frequency and three direct frequencies. The LED indicators on the transmitter show the frequency selected, output level, and battery status. An audio indicator beeps to advise the quality of the connection.   Two configurations are available offering different induction and connection frequencies. Config A006 = Induction: 83kHz  ...
View More

FLS-2 50-Watt Rack Mount Transmitter

Fiber optic cables are a critical part of modern life. From the vast amount of data that they carry (supporting Global Business) to the individual internet users and more importantly emergency services, the FLS system is at the heart of damage prevention for fiber optic cables. The FLS-2 is a high performance long...
View More