Loc-1Tx 1-Watt Transmitter
The Loc-1Tx Transmitter has one induction frequency and three direct frequencies. The LED indicators on the transmitter show the frequency selected, output level, and battery status. An audio indicator beeps to advise the quality of the connection. Two configurations are available offering different induction and connection frequencies. Config A006 = Induction: 83kHz ...
FLS Transmitter
The FLS is a high performance long distance fiber optic cable locating and monitoring transmitter. As a central office or regen rack mounted system, the FLS offers a full 50 watts of output. The FLS can be used for long-haul fiber lines and metropolitan loop networks. All features may be accessed remotely or locally with the hand-held touch screen....
VM-560 Transmitter
The 1-Watt VM-560 Transmitter applies a locate frequency by direct connection or induction. Built of Rugged and lightweight ABS plastic the transmitter has one induction and two direct connect frequencies. Optional Induction Clamps can be used to clamp around a line and induce the locate signal onto it. Frequencies: 83kHz induction / 8.19kHz...
VM-550 Transmitter
The 1-Watt VM-550 Transmitter applies a locate frequency by direct connection or induction. Built of Rugged and lightweight ABS plastic the transmitter has one induction and two direct connect frequencies. Optional Induction Clamps can be used to clamp around a line and induce the locate signal onto it. Frequencies: 83kHz induction / 8.19kHz...
Loc-5Tx Transmitter
The Loc-5Tx transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The backlit dot matrix display shows output current, connection type, volts, resistance, frequency, volume, battery condition and high voltage...
Loc-5STx 5-Watt Transmitter and Loc-5DTx 5-Watt Dual Output Transmitter
The Loc-5STx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The two inch by one-inch back-lit dot matrix display shows output current, connection type, volts, resistance, frequency, volume,...