The NEW vLoc-9800 is a new addition to the vLoc Series 2 Locator Range, it builds on the Metrotech tradition of performance and simplicity.
Distance Sensitive Left/Right GuidanceTM
Pioneered by Metrotech thirty years ago - this is the standard method of locating in many industries. Most manufacturers provide left/right indication using a peak/null antenna set. Metrotech product and now the vLoc-9800 uses two horizontal guidance antennas some distance apart. This provides very accurate left/right separation – that, together with an exceptionally high level of sensitivity, produces a crisp, fast, accurate response… and an easier locate.
The NEW vLoc-9800 Features:
The A-frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage allowing the metallic sheath (or internal conductor) to become in contact with the ground.
The LPC separation filter (LPC) is used to safely inject a trace tone to a live cable via a domestic mains socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for connecting to voltages between 100V AC and 250V AC.
MyLocator2 configuration tool is a software package that enables the operator to configure the vLoc series 2 of locators.
MyLocator2 allows operators
Used to connect the transmitter to a line using the direct connection method.
Used to extend the ground connection to a suitable grounding position.
Adapts the direct connection crocodile clip to banana plug allowing the direct connection leads to be connected to a banana socket.
Alkaline battery tray for Loc-1Tx transmitter. Requires 4 x Alkaline D cells.
NiMH rechargeable battery pack for Loc-5Tx transmitter.
Alkaline battery tray for Loc-5Tx transmitter. Requires 8 x Alkaline D cells.
Mains charger (100-250V AC input) used to charge 5 Watt or 10 Watt transmitters rechargeable battery packs. Supplied as standard with rechargeable battery option.
The Lithium-ion rechargeable battery pack is supplied as standard for receivers. Charging is done with the battery inside the receiver.
The receiver Lithium-ion battery charger is supplied as a standard item. It is powered from the mains supply. (100-250V AC)
This alkaline battery holder is supplies as standard and is used in the event the rechargeable battery pack has fully discharged. It can be considered as a backup battery pack. It requires 6 x AA alkaline batteries.
A small transmitting coil which may be built into a product such as a sewer camera or packaged as a small self contained battery powered transmitter. A receiver tuned to the same frequency can locate the position and depth of the Sonde and hence whatever it is attached to or in. Frequently used for locating sewer cameras, and the non metallic pipes.
Used to make an independent connection to the ground so as to complete the circuit when the transmitter is connected to a line using the direct connection method.
The Live Cable Connector (LCC) should only be used by approved operatives adhering to company regulations and work practices while using appropriate safety equipment and clothing. For use on live cables up to 480 V ac 60/50Hz.
Compatible with Loc -10Tx, Loc -10TxSIS, Loc -5Tx, Loc-1Tx and vScan Tx.